A “Certifiable” (STANAG 4671-compliant) Ground Control Station (C-GCS) from General Atomics Aeronautical Systems, Inc. (GA-ASI) was used for the first time on October 4 to fly a Remotely Piloted Aircraft (RPA).
The flight originated from Yuma, Arizona and flew GA-ASI’s MQ-9B SkyGuardian RPA. Aircraft flight critical functions were tested successfully, including hold modes, landing gear, flap operation, and “hand flying” of the aircraft.
“This marks a major milestone for the C-GCS,” said Linden Blue, CEO, GA-ASI. “We continue on a path towards integrating RPA into non-segregated national and international airspace, where they can fly safely alongside commercial aircraft. To achieve that goal, we are producing STANAG-compliant Ground Control Stations in addition to STANAG-compliantSkyGuardian aircraft.”
The C-GCS includes the same flight management system, cockpit displays, and navigation guidance as those found on modern corporate and commercial aircraft. The C-GCS also enables weapons and payload control for SkyGuardian. The ground station’s hardware and software architecture provides separation of flight and mission critical functions. This allows mission software to be modified without affecting flight critical software. The mission Human Machine Interface (HMI) is designed to provide situational awareness on a single tactical situation display. Avionics associated with the flight management system, including traffic collision avoidance, are certified under FAA Technical Standard Orders (TSO).
The upcoming test schedule for the C-GCS includes full launch and recovery, HMI enhancements, mission critical functions, and SATCOM datalink testing.
Source: Press Release
UAV DACH: Beitrag im Original auf https://www.uasvision.com/2018/11/30/first-flight-for-ga-asis-certifiable-ground-control-station/, mit freundlicher Genehmigung von UAS Vision automatisch importiert, Der Beitrag gibt nicht unbedingt die Meinung oder Position des UAV DACH e.V. wieder. Das Original ist in englischer Sprache.